500ml Low Speed Bottle
Product Characteristics
- Use polypropylene copolymers (PPCO) material, which is translucent with excellent chemical resistance and mall molecular particles, and it won't produce precipitates.
- Advanced production technology and special surface treatment significantly increase lining finish, decrease the cutting force to cell, and strengthen the absorbability of the bottom of the bottle, which can be more effective in separating samples.
- It can be under high temperature and high pressure sterilization for 20 minutes in 121°C、0.1mpa（15psig/1bar).
- Excellent mechanical properties let it reusable after clean and high temperature sterilization.
6. Screw off the cap before high temperature sterilization, and don’t tighten the caps when sterilization.
Product Information
|
Order No. |
0305536100 |
|
Capacity |
500ml |
|
Material |
PPCO |
|
Size（Diameter x Height） |
Φ79x137mm |
|
Max. RCF |
4800xg |
Note： 500ml low speed bottle can be used in 500ml rotor of low speed centrifuge made by“cence”.
*Recommend high temperature sterilization before use it.
Business Info.
Address: No.35, Jinsui Road, Wangcheng Economic Development Zone, Changsha 410200, Hunan, China
Wechat ID: centrifugecence
Message
*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible
IPV4/IPV6