1000ml High Speed Centrifugal Bottles
Product Characteristics
- Use rigorous tested polypropylene copolymers (PPCO) as raw material, which conforms to the international standards of US food and drug administration (FDA) etc.
- Wide-mouth design can easily take samples, double cap inside and outside, not only ensure sealing, but also effectively prevent the secondary pollution of samples when operating.
- Max speed over 8000RPM, it can withstand 15000xg relative centrifugal force.
- Wide mouth bottle have bottle of bigger bottle hole, can easily take out the samples.
- It can be under high temperature and high pressure sterilization for 20 minutes in 121°C、0.1mpa（15psig/1bar).
- Excellent mechanical properties let it reusable after clean and high temperature sterilization.
7. Screw off the cap before high temperature sterilization, and don’t tighten the caps when sterilization.
Product Information
|
Order No. |
0305536130 |
|
Capacity |
1000ml |
|
Material |
PPCO |
|
Size（Diameter x Height） |
Φ97x166mm |
|
Max. RCF |
15000xg |
Note：It can apply to“HITACHI”“Beckman”“Xiangyi”1000ml high speed centrifuge.
*Recommend high temperature sterilization before use it.
Business Info.
Address: No.35, Jinsui Road, Wangcheng Economic Development Zone, Changsha 410200, Hunan, China
Wechat ID: centrifugecence
Message
*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible
IPV4/IPV6